Las Vegas Elite Concrete Polished concrete is a mechanical process, not a coating: the slab is ground with progressively finer diamonds until it takes a shine of its own. Free on-site quote, usually within two working days.

It runs through a sequence of diamond grits, usually with a densifier applied partway, which hardens the surface chemically so the finer grits can bring up a polish.
Gloss level is a choice on a scale from a matte honed finish to a high gloss. Exposure level is a separate choice: cream leaves the paste, salt and pepper shows fine aggregate, and full exposure shows the stone.
Polished concrete shows up in valley commercial fit-outs and in newer homes with slab-on-grade living areas, where there is no basement to complicate it.
The slab has to be flat to begin with. Grinding removes material evenly, so a slab with dips and high spots ends up with different exposure levels in different places, and that is visible and permanent.
A densifier is applied mid-sequence and left to react. Skipping it leaves a surface that will not take the higher grits and will not hold a polish.
Existing cracks and holes are filled with a matching grout before the finer passes, so the fill is polished at the same time as the slab.
It is genuinely low maintenance indoors and it is not an exterior finish. A polished slab outdoors is slippery when wet and the surface dulls under UV and weather.
Priced per square foot by grit level and exposure. It is competitive with good tile or coating on a slab that is already flat, and it becomes expensive on a slab that needs levelling first.
Priced per square foot by grit level and exposure, and it gets expensive on a slab that needs levelling first.
An old slab with patches, saw cuts and previous repairs will show every one of them once it is polished. That is worth seeing on a test panel before committing the whole floor.
It is an interior finish. A polished slab outdoors in this sun dulls and is slippery under monsoon rain.
We cover Las Vegas, Henderson, North Las Vegas and the wider Clark County valley, including and 34 more areas.
Structurally most can. Whether you like the result depends on flatness and on what is already in the slab, so grind a test panel first.
Dry, no more than tile. Wet, yes, which is why it is an interior finish.
There is no film. The shine is the concrete itself, ground and densified, so there is nothing to peel.
Tell us what you need. We answer the same day, the free estimate is on site, and nobody chases you afterwards.
Call (702) 966-9498 and we will come out, measure, and leave you a written quote. There is no charge for the visit and no obligation afterwards.
Photos of recent pours, before and after shots, and the jobs we are on this week.